[1] |
Johnson C B, Carraway D L. A transition detection study at Mach 1.5、2.0 and 2.5 using a micro-thin hot-film system[C]. Instrumentation in Aerospace Simulation Facilities, ICIASF'89 Record, International Congress on IEEE, 1989:82-94.
|
[2] |
Riedl X, Leuckert J, Engert M, et al. Transition measurement with microstructured hot film sensor arrays on a laminar flow airfoil model[M]. Berlin Heidelberg:Springer, 2013:641-648.
|
[3] |
Tokugawa N, Yoshida K. Transition detection on supersonic natural laminar flow wing in the flight[R]. AIAA Paper, 2006, 3165.
|
[4] |
Naughton J W, Sheplak M. Modern developments in shear-stress measurement[J]. Progress in Aerospace Sciences, 2002, 38(6):515-570. https://www.researchgate.net/publication/228703570_Modern_developments_in_shear-stress_measurement_1
|
[5] |
Sheplak M, Cattafesta L, Nishida T, et al. MEMS shear stress sensors:promise and progress[C]. 24th AIAA Aerodynamic Measurement Technology Testing Conference, Florida University, 2004.
|
[6] |
Oudheusden B, Huijsing J. Integrated flow friction sensor[J]. Sensors and Actuators, 1988, 15:135-144. doi: 10.1016/0250-6874(88)87003-3
|
[7] |
Liu C, Tai Y C, Huang J, et al. Surface micromachined thermal shear-stress sensor[C]//Proceedings of the ASME Symposium on Application of Microfabrication to Fluid Mechanics, ASME Winter Annual Meeting, Chicago, 1994:9-15.
|
[8] |
Liu C, Huang J B, Zhu Z, et al. A micromachined flow shear-stress sensor based on thermal transfer principles[J]. Journal of Microelectromechanical Systems, 1999, 8(1):90-99. doi: 10.1109/84.749408
|
[9] |
Huang J B, Jiang F K, Tai Y C, et al. A micro-electro-mechanical-system-based thermal shear-stress sensor with self-frequency compensation[J]. Measurement Science and Technology, 1999, 10(8):687. doi: 10.1088/0957-0233/10/8/303
|
[10] |
Jiang F, Tai Y C, Gupta B, et al. A surface-micromachined shear-stress imager[C]//Proceedings of 1996 IEEE Micro Electro Mechanical Systems Workshop (MEMS'96), San Diego, 1996:110-115.
|
[11] |
Jiang F, Tai Y C, Walsh K, et al. A flexible MEMS technology and its first application to shear-stress sensor skin[C]//Proceedings of 1997 IEEE Micro Electro Mechanical Systems Workshop (MEMS'97), Nagoya, Japan, 1997:465-470.
|
[12] |
Jiang F, Lee G B, Tai Y C, et al. A flexible micromachine-based shear-stress sensor array and its application to separation-point detection[J]. Sensors and Actuators A:Physical, 2000, 79(3):194-203. doi: 10.1016/S0924-4247(99)00277-0
|
[13] |
Jiang F, Xu Y, Weng T, et al. Flexible shear stress sensor skin for aerodynamics applications[C]. The Thirteenth Annual International Conference on IEEE, 2000:364-369.
|
[14] |
Xu Y, Jiang F, Lin Q, et al. Underwater shear-stress sensor[C]. IEEE International Conference on Micro Electro Mechanical Systems, 2002:340-343.
|
[15] |
Xu Y, Tai Y C, Huang A, et al. IC-integrated flexible shear-stress sensor skin[J]. Journal of Microelectromechanical Systems, 2003, 12(5):740-747. doi: 10.1109/JMEMS.2003.815831
|
[16] |
Xu Y, Jiang F, Newbern S, et al. Flexible shear-stress sensor skin and its application to unmanned aerial vehicles[J]. Sensors & Actuators A:Physical, 2003, 105(3):321-329.
|
[17] |
Xu Y, Lin Q, Lin G, et al. Micromachined thermal shear-stress sensor for underwater applications[J]. Journal of Microelectromechanical Systems, 2005, 14(5):1023-1030. doi: 10.1109/JMEMS.2005.856644
|
[18] |
Cain A, Chandrasekaran V, Nishida T, et al. Development of a wafer-bonded, silicon nitride membrane thermal shear-stress sensor with platinum sensing element[C]. Technical Digest, Solid-State Sensor and Actuator Workshop, 2000:300-303.
|
[19] |
Chandrasekaran V, Cain A, Nishida T, et al. Characterization of a micromachined thermal shear stress sensor[C]. 39th Aerospace sciences Meeting and Exhibit, 2001.
|
[20] |
Chandrasekaran V. Dynamic calibration technique for thermal shear-stress sensors with variable mean flow[D]. Gainesville:University of Florida, 2000.
|
[21] |
Jang S L. A model of 1/f noise in polysilicon resistors[J]. Solid-State Electron, 1990, 33:1155-1162. doi: 10.1016/0038-1101(90)90094-U
|
[22] |
Sheplak M, Padmanabhan A, Schmidt M A, et al. Dynamic calibration of a shear-stress sensor using Stokes-layer excitation[J]. AIAA Journal, 2001, 39(5):819-823. doi: 10.2514/2.1415
|
[23] |
Ou Y, Qu F, Wang G, et al. A MEMS thermal shear stress sensor produced by a combination of substrate-free structures with anodic bonding technology[J]. Applied Physics Letters, 2016, 109(2):023512. doi: 10.1063/1.4958842
|
[24] |
Buder U, Berns A, Obermeier E, et al. Aero MEMS wall hot-wire anemometer on polyimide foil for measurement of high frequency fluctuations[C]. Sensors, 2005 IEEE, 2005.
|
[25] |
Buder U, Henning L, Neumann A, et al. Aeromems wall hot-wire sensor arrays on polyimide with through foil vias and bottom side electrical contacts[C]. Solid-State Sensors, Actuators and Microsystems Conference, 2007:2333-2336.
|
[26] |
Buder U, Petz R, Kittel M, et al. Aero MEMS polyimide based wall double hot-wire sensors for flow separation detection[J]. Sensors & Actuators A:Physical, 2008, 142(1):130-137.
|
[27] |
刘奎, 苑伟政, 邓进军, 等.微型热敏传感器的薄膜电阻设计研究[J].中国机械工程, 2005, (z1):202-204. doi: 10.3321/j.issn:1004-132X.2005.z1.069Liu K, Yuan W Z, Deng J J, et al. Design investigation on micro thermal sensor film resistor[J]. China Mechanical Engineering, 2005, (z1):202-204. doi: 10.3321/j.issn:1004-132X.2005.z1.069
|
[28] |
刘奎, 苑伟政, 邓进军, 等.基于微型剪应力传感器阵列的边界层分离点测定方法研究[J].航空学报, 2006, 27(1):142-146. http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB200601028.htmLiu K, Yuan W Z, Deng J J, et al. Investigation of using micro shear stress sensor array to detect boundary-layer separation point[J]. Chinese Journal of Aeronautics, 2006, 27(1):142-146. http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB200601028.htm
|
[29] |
刘奎, 苑伟政, 马炳和, 等.微型热敏传感器系统动态特性理论研究[J].仪器仪表学报, 2006, 27(6):648-652. http://www.cnki.com.cn/Article/CJFDTOTAL-YQXB200606021.htmLiu K, Yuan W Z, Ma B H, et al. Investigation in the dynamic characteristic of the micro thermal sensor system[J]. Chinese Journal of Scientific Instrument, 2006, 27(6):648-652. http://www.cnki.com.cn/Article/CJFDTOTAL-YQXB200606021.htm
|
[30] |
刘奎, 苑伟政, 邓进军, 等.微型热敏传感器的结构设计及仿真分析[J].航空学报, 2007, 28(2):476-480. http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB200702042.htmLiu K, Yuan W Z, Deng J J, et al. Design and simulation of structure of micro thermal sensor device[J]. Chinese Journal of Aeronautics, 2007, 28(2):476-480. http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB200702042.htm
|
[31] |
Liu K, Yuan W Z, Deng J J, et al. Detecting boundary-layer separation point with a micro shear stress sensor array[J]. Sensors and Actuators A:Physical, 2007, 139(1):31-35.
|
[32] |
Liu K, Yuan W Z, Deng J J, et al. Sensing flow separation on a typical aerofoil by mems flexible thermal sensor array[C]. First International Conference on Integration and Commercialization of Micro and Nanosystems, American Society of Mechanical Engineers, 2007:235-239.
|
[33] |
Liu K, Yuan W Z, Ma B H, et al. The fabrication and integration of a novel shear stress sensor array and its wind tunnel test[J]. Journal of Micro-Bio Robotics, 2008, 4(3):115-120.
|
[34] |
马炳和, 赵建国, 邓进军, 等.全柔性热膜微传感器阵列制造工艺及性能优化[J].光学精密工程, 2009, 17(8):1971-1977. http://www.cnki.com.cn/Article/CJFDTOTAL-GXJM200908032.htmMa B H, Zhao J G, Deng J J, et al. Fabrication of flexible hot film sensors arrary and its optimization[J]. Optics and Precision Engineering, 2009, 17(8):1971-1977. http://www.cnki.com.cn/Article/CJFDTOTAL-GXJM200908032.htm
|
[35] |
马炳和, 傅博, 李建强, 等.溅射-电镀微成型制造柔性热膜传感器阵列[J].航空学报, 2011, 32(11):2147-2152. http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB201111022.htmMa B H, Fu B, Li J Q, et al. Flexible hot-film sensor array fabricated with sputtering-electroplating micromachining[J]. Chinese Journal of Aeronautics, 2011, 32(11):2147-2152. http://www.cnki.com.cn/Article/CJFDTOTAL-HKXB201111022.htm
|
[36] |
马炳和, 王毅, 姜澄宇, 等.柔性热膜剪应力传感器水下测量温度修正[J].实验流体力学, 2014, 28(2):39-44. doi: 10.11729/syltlx20140006Ma B H, Wang Y, Jiang C Y, et al. Temperature correction of flexible thermal shear stress sensor for underwater measurements[J]. Journal of Experiments in Fluid Mechanics, 2014, 28(2):39-44. doi: 10.11729/syltlx20140006
|
[37] |
肖同新, 马炳和, 邓进军, 等.基于柔性热膜传感器的流体壁面剪应力测量系统[J].传感器与微系统, 2013, 32(7):101-105. http://www.cnki.com.cn/Article/CJFDTOTAL-CGQJ201307031.htmXiao T X, Ma B H, Deng J J, et al. Fluid wall shear stress measurement system based on flexible hot film sensor[J]. Transducer and Microsystem Technologies, 2013, 32(7):101-105. http://www.cnki.com.cn/Article/CJFDTOTAL-CGQJ201307031.htm
|
[38] |
Li X Y, Li Y B, Ma B H, et al. Modelling and calibration of microthermal sensor for underwater wall shear stress measurement[J]. Micro & Nano Letters, 2014, 9(7):486-489. https://www.researchgate.net/publication/275514855_Modelling_and_calibration_of_microthermal_sensor_for_underwater_wall_shear_stress_measurement
|
[39] |
Zhu P F, Ma B H, Jiang C Y, et al. Improved sensitivity of micro thermal sensor for underwater wall shear stress measurement[J]. Microsystem Technologies, 2015, 21(4):785-789. doi: 10.1007/s00542-014-2304-7
|
[40] |
Beutel T, Leester-Schädel M, Dietzel A. Manufacturing of flexible micro hot-film probes for aeronautical purposes[J]. Microelectronic Engineering, 2013, 111(11):238-241.
|
[41] |
Beutel T, Schwerter M, Leesterschädel M. Flexible hot-film anemometer arrays for flow measurements on curved structures[C]. SPIE 8763 Smart Sensors, Actuators, and MEMS Ⅵ. 2013:87630N-87630N-8.
|
[42] |
Schwerter M, Beutel T, Leester-Schädel M, et al. Flexible hot-film anemometer arrays on curved structures for active flow control on airplane wings[J]. Microsystem Technologies, 2014, 20(4-5):821-829. doi: 10.1007/s00542-013-2054-y
|
[43] |
Hasegawa Y, Yamada T, Shikida M. Fabrication of smooth-surfaced flexible thermal sensor for detecting wall shear stress[C]. IEEE, International Conference on MICRO Electro Mechanical Systems, 2016.
|
[44] |
Yu H, Ai L, Rouhanizadeh M, et al. Flexible polymer sensors for in vivo intravascular shear stress analysis[J]. Journal of Microelectromechanical Systems, 2008, 17(5):1178-1186. doi: 10.1109/JMEMS.2008.927749
|
[45] |
Ai L, Yu H, Takabe W, et al. Optimization of intravascular shear stress assessment in vivo[J]. Journal of Biomechanics, 2009, 42(10):1429-1437. doi: 10.1016/j.jbiomech.2009.04.021
|
[46] |
Tang R, Huang H, Yang Y M, et al. Three-dimensional flexible thermal sensor for intravascular flow monitoring[J]. IEEE Sensors Journal, 2013, 13(10):3991-3998. doi: 10.1109/JSEN.2013.2264623
|
[47] |
Li C, Wu P M, Han J, et al. A flexible polymer tube lab-chip integrated with microsensors for smart microcatheter[J]. Biomedical Microdevices, 2008, 10(5):671-679. doi: 10.1007/s10544-008-9178-3
|