Parameter influence and optimization of energy conversion efficiency of synthetic jet actuators
-
摘要: 压电式合成射流激励器具有无气源、射流速度高、响应快等特点,在流动控制领域应用广泛。射流出口速度峰值和能量转换效率是衡量压电式合成射流激励器性能的重要指标。在获得较高出口速度时,现有压电式合成射流激励器能量转换效率偏低。为提高压电式合成射流激励器性能,利用热线风速仪和功率计测量了其出口速度和功率,研究了出口长度、出口深度、腔体高度和陶瓷片厚度等参数对其性能的影响规律。研究发现:不同参数下,压电式合成射流激励器出口速度峰值随平均功率变化的趋势相似。通过对压电式合成射流激励器构型进行优化设计,提高了射流出口速度峰值,提升了能量转换效率(最大提升了233.3%),有效降低了能耗。Abstract: Piezoelectric-driven synthetic jet actuators have been widely used in various flow control areas due to the characteristics of no air supply, high jet velocity and response frequency. The exit peak velocity and energy conversion efficiency are important indicators to measure the performance of piezoelectric-driven actuators. When a higher exit velocity is obtained, the energy conversion efficiency of the existing piezoelectric-driven synthetic jet actuators is low. To improve the performance of synthetic jet actuators, the exit velocity and power are measured by the hot-wire anemometer and power meter, respectively. The effects of the exit length, exit neck length, cavity height and piezoceramics thickness on the performance of actuators are analyzed. It is found that for different configuration parameters, the exit peak velocity displays a similar trend with power. Based on the optimized actuator configuration, the exit peak velocity is increased, and the energy conversion efficiency is improved in comparison to the previous results with the maximum increment of 233.3%, thereby reducing the energy consumption of actuators.
-
表 1 合成射流激励器参数
Table 1. Synthetic jet actuator configuration parameters
激励器参数 出口长度
${l_{\rm{o}}^*}$出口深度
${n_{\rm{o}}^*}$腔体高度
${h_{\rm{c}}^*}$陶瓷片厚度
${\delta _{\rm{p}}^*}$基准工况 20 15.0 2.0 0.15 变化工况 10, 15,
20, 2510.0, 12.5, 15.0,
17.5, 20.01.5, 2.0,
2.50.15, 0.30,
0.40表 2 合成射流激励器优化后的参数
Table 2. Optimized synthetic jet actuator configuration parameters
激励器参数 出口长度${l_{\rm{o}}^*}$ 出口深度${n_{\rm{o}}^*}$ 腔体高度${h_{\rm{c}}^*}$ 陶瓷片厚度${\delta _{\rm{p}}^*}$ 优化工况 25 12.5 2.5 0.15 -
[1] CARTER D L. Legacy aircraft drag reduction[C]//Proc of the 54th AIAA Aerospace Sciences Meeting. 2016. doi: 10.2514/6.2016-0535 [2] WANG J J, FENG L H. Flow control techniques and applications[M]. Cambridge: Cambridge University Press, 2018. [3] 罗振兵, 夏智勋, 邓雄, 等. 合成双射流及其流动控制技术研究进展[J]. 空气动力学学报, 2017, 35(2): 252–264. doi: 10.7638/kqdlxxb-2017.0053LUO Z B, XIA Z X, DENG X, et al. Research progress of dual synthetic jets and its flow control technology[J]. Acta Aerodynamica Sinica, 2017, 35(2): 252–264. doi: 10.7638/kqdlxxb-2017.0053 [4] GLEZER A, AMITAY M. Synthetic jets[J]. Annual Review of Fluid Mechanics, 2002, 34: 503–529. doi: 10.1146/annurev.fluid.34.090501.094913 [5] 罗振兵, 夏智勋. 合成射流技术及其在流动控制中应用的进展[J]. 力学进展, 2005, 35(2): 221–234. doi: 10.6052/1000-0992-2005-2-J2004-044LUO Z B, XIA Z X. Advances in synthetic jet technology and applications in flow control[J]. Advances in Mechanics, 2005, 35(2): 221–234. doi: 10.6052/1000-0992-2005-2-J2004-044 [6] 张攀峰, 王晋军, 冯立好. 零质量射流技术及其应用研究进展[J]. 中国科学(E辑), 2008, 38(3): 321–349. doi: 10.3321/j.issn:1006-9275.2008.03.001ZHANG P F, WANG J J, FENG L H. Research progress of zero-mass jet technology and its application[J]. Science in China Series E:Technological Sciences, 2008, 38(3): 321–349. doi: 10.3321/j.issn:1006-9275.2008.03.001 [7] 吴继飞, 罗新福, 徐来武, 等. 活塞式合成射流技术及其应用研究[J]. 实验流体力学, 2014, 28(6): 61–65. doi: 10.11729/syltlx20130076WU J F, LUO X F, XU L W, et al. Investigation on piston-typed synthetic j et technology and its application[J]. Journal of Experiments in Fluid Mechanics, 2014, 28(6): 61–65. doi: 10.11729/syltlx20130076 [8] TANG H, ZHONG S, JABBAL M, et al. Towards the design of synthetic-jet actuators for full-scale flight conditions: Part 2: Low-dimensional performance prediction models and actuator design method[J]. Flow, Turbulence and Combustion, 2007, 78(3): 309–329. doi: 10.1007/s10494-006-9061-3 [9] 李斌斌, 姚勇, 顾蕴松, 等. 基于合成射流的二维后台阶分离流主动控制[J]. 航空学报, 2016, 37(6): 1753–1762. doi: 10.7527/S1000-6893.2016.0014LI B B, YAO Y, GU Y S, et al. Active control of 2D backward facing step separated flow based on synthetic jet[J]. Acta Aeronautica et Astronautica Sinica, 2016, 37(6): 1753–1762. doi: 10.7527/S1000-6893.2016.0014 [10] 张振辉, 李栋. 合成射流激励器的特性及其后台阶流动控制应用[J]. 机械工程学报, 2018, 54(6): 224–232. doi: 10.3901/JME.2018.06.224ZHANG Z H, LI D. Characteristics of a synthetic jet actuator and its application on control of flow over a backward facing step[J]. Journal of Mechanical Engineering, 2018, 54(6): 224–232. doi: 10.3901/JME.2018.06.224 [11] 赵国庆, 招启军, 顾蕴松, 等. 合成射流对失速状态下翼型大分离流动控制的试验研究[J]. 力学学报, 2015, 47(2): 351–355. doi: 10.6052/0459-1879-14-134ZHAO G Q, ZHAO Q J, GU Y S, et al. Experimental investigation of synthetic jet control on large flow separation of airfoil during stall[J]. Chinese Journal of Theoretical and Applied Mechanics, 2015, 47(2): 351–355. doi: 10.6052/0459-1879-14-134 [12] 杨升科, 郭奇灵, 罗振兵, 等. 基于合成射流的机翼溢流冰防护实验[J]. 航空动力学报, 2020, 35(11): 2364–2370. doi: 10.13224/j.cnki.jasp.2020.11.013YANG S K, GUO Q L, LUO Z B, et al. Experiment on airfoil runback ice protection based on synthetic jet[J]. Journal of Aerospace Power, 2020, 35(11): 2364–2370. doi: 10.13224/j.cnki.jasp.2020.11.013 [13] ZHANG B L, LIU H, LI Y Y, et al. Experimental study of coaxial jets mixing enhancement using synthetic jets[J]. Applied Sciences, 2021, 11(2): 803. doi: 10.3390/app11020803 [14] JABBAL M, JEYALINGAM J. Towards the noise reduction of piezoelectrical-driven synthetic jet actuators[J]. Sensors and Actuators A: Physical, 2017, 266: 273–284. doi: 10.1016/j.sna.2017.09.036 [15] 曹永飞, 顾蕴松, 韩杰星. 流体推力矢量技术验证机研制及飞行试验研究[J]. 空气动力学学报, 2019, 37(4): 593–599. doi: 10.7638/kqdlxxb-2017.0202CAO Y F, GU Y S, HAN J X. Development and flight testing of a fluidic thrust vectoring demonstrator[J]. Acta Aerodynamica Sinica, 2019, 37(4): 593–599. doi: 10.7638/kqdlxxb-2017.0202 [16] WANG L, FENG L H, WANG J J, et al. Evolution of low-aspect-ratio rectangular synthetic jets in a quiescent environment[J]. Experiments in Fluids, 2018, 59(6): 1–16. doi: 10.1007/s00348-018-2544-x [17] WANG L, FENG L H, WANG J J, et al. Characteristics and mechanism of mixing enhancement for noncircular synthetic jets at low Reynolds number[J]. Experimental Thermal and Fluid Science, 2018, 98: 731–743. doi: 10.1016/j.expthermflusci.2018.06.021 [18] WANG L, FENG L H, XU Y. Laminar-to-transitional evolution of three-dimensional vortical structures in a low-aspect-ratio rectangular synthetic jet[J]. Experimental Thermal and Fluid Science, 2019, 104: 129–140. doi: 10.1016/j.expthermflusci.2019.02.004 [19] GOMES L, CROWTHER W. Towards a practical piezoceramic diaphragm based synthetic jet actuator for high subsonic applications - effect of chamber and orifice depth on actuator peak velocity[C]//Proc of the 3rd AIAA Flow Control Conference. 2006. doi: 10.2514/6.2006-2859 [20] VAN BUREN T, WHALEN E, AMITAY M. Achieving a high-speed and momentum synthetic jet actuator[J]. Journal of Aerospace Engineering, 2016, 29(2): 04015040. doi: 10.1061/(asce)as.1943-5525.0000530 [21] GUNGORDU B. Jet velocity enhancement of synthetic jets: unimorph vs. bimorph piezoelectric actuator[C]//Proc of the AIAA SCITECH 2022 Forum. 2022. doi: 10.2514/6.2022-0710 [22] CROWTHER W J, GOMES L T. An evaluation of the mass and power scaling of synthetic jet actuator flow control technology for civil transport aircraft applications[J]. Proceedings of the Institution of Mechanical Engineers, Part I:Journal of Systems and Control Engineering, 2008, 222(5): 357–372. doi: 10.1243/09596518jsce519 [23] VAN BUREN T, WHALEN E, AMITAY M. Vortex formation of a finite-span synthetic jet: effect of rectangular orifice geometry[J]. Journal of Fluid Mechanics, 2014, 745: 180–207. doi: 10.1017/jfm.2014.77 [24] JEYALINGAM J, JABBAL M. Optimization of Synthetic Jet Actuator design for noise reduction and velocity enhancement[C]//Proc of the 8th AIAA Flow Control Conference. 2016. doi: 10.2514/6.2016-4236 [25] LOCKERBY D A, CARPENTER P W. Modeling and design of microjet actuators[J]. AIAA Journal, 2004, 42(2): 220–227. doi: 10.2514/1.9091 [26] RIZZETTA D P, VISBAL M R, STANEK M J. Numerical investigation of synthetic-jet flowfields[J]. AIAA Journal, 1999, 37(8): 919–927. doi: 10.2514/2.811 [27] MANE P, MOSSI K, ROSTAMI A, et al. Piezoelectric actuators as synthetic jets: Cavity dimension effects[J]. Journal of Intelligent Material Systems and Structures, 2007, 18(11): 1175–1190. doi: 10.1177/1045389x06075658 [28] CHEN F J, YAO C, BEELER G, et al. Development of synthetic jet actuators for active flow control at NASA Langley[C]//Proc of the Fluids 2000 Conference and Exhibit. 2000. doi: 10.2514/6.2000-2405 [29] 邓雄. 合成双射流矢量控制特性及其强化换热应用研究[D]. 长沙: 国防科学技术大学, 2015.DENG X. Research on vector-controlling characteristic of dual synthetic jets and its applications in heat transfer enhancement[D]. Changsha: National University of Defense Technology, 2015.