Research on key technologies of debugging and operating in 0.6m×0.6m continuous transonic wind tunnel

Xiong Bo; Zhou Enmin; Cheng Song; Zhang Wen; Liu Kai; Luo Xinfu

doi:10.11729/syltlx20150052

Volume 30 Issue 4

Turn off MathJax

Article Contents

Article Navigation > Journal of Experiments in Fluid Mechanics > 2016 > 30(4): 81-86

Xiong Bo, Zhou Enmin, Cheng Song, et al. Research on key technologies of debugging and operating in 0.6m×0.6m continuous transonic wind tunnel[J]. Journal of Experiments in Fluid Mechanics, 2016, 30(4): 81-86. doi: 10.11729/syltlx20150052

Citation:

PDF( 7832 KB)

Research on key technologies of debugging and operating in 0.6m×0.6m continuous transonic wind tunnel

doi: 10.11729/syltlx20150052

High Speed Aerodynamics Research Institute, China Aerodynamics Research and Development Center, Mianyang Sichuan 621000, China

Received Date: 2015-04-06
Rev Recd Date: 2015-12-01
Publish Date: 2016-08-25

Abstract

Abstract

In order to reduce the risk of constructing a large-scale continuous wind tunnel, research on key technologies is carried out in the 0.6m wind tunnel of China Aerodynamics Research and Development Center, such as anti surge control and speed control of the compressor, Mach number control, and so on. Pressure fluctuation method is used to measure the surge margin of the compressor accurately, and the security of the compressor can be well ensured by setting a reasonable alarm line and surge line. Vector control technology is used to achieve the accurate control of speed, and the 0.03% control precision is achieved. The accurate control of Mach number is achieved by the function relationship between the compressor speed, chamber flow, the centrosome displacement and the Mach number, and the 0.002 control precision is achieved. Through the research of the key technologies, the operation mode of fixing stagnation pressure and Mach number is realized. Due to the excellent quality of flow fields achieved in the wind tunnel, it is a good platform to carry out basic and leading research on the construction of large continuous wind tunnels.
- continuous wind tunnel,
- debugging,
- compressor,
- flow field,
- control precision

FullText(HTML)

References(13)

References

[1]	廖达雄, 陈吉明, 彭强, 等. 连续式跨声速风洞设计关键技术[J]. 实验流体力学, 2011, 25(4): 74-77. http://www.syltlx.com/CN/abstract/abstract10640.shtml Liao D X, Chen J M, Peng Q, et al. Key design techniques of low noise continuous transonic wind tunnel[J]. Journal of Experiments in Fluid Mechanics, 2011, 25(4): 74-77. http://www.syltlx.com/CN/abstract/abstract10640.shtml
[2]	范洁川. 世界风洞[M]. 北京: 航空工业出版社, 1992. Fan J C. The wind tunnel[M]. Beijing: Navigate Industrial Press, 1992.
[3]	郝礼书, 乔志德, 武洁, 等. NF-6风洞AV90-2轴流压缩机喘振曲线测试研究[J]. 西北工业大学学报, 2009, 27(4): 477-488. http://cdmd.cnki.com.cn/Article/CDMD-10285-2004132785.htm Hao L S, Qiao Z D, W J, et al. Critically investigating anti-surge monitor and control system of AV90-2 axial compressor inNWPU NF-6 wind tunnel[J]. Journal of Northwestern Polytechnical University, 2009, 27(4): 477-488. http://cdmd.cnki.com.cn/Article/CDMD-10285-2004132785.htm
[4]	雷剑宇, 廖明夫, 杨伸记, 等. 预测风机喘振边界的新方法[J]. 风机技术, 2005, (4): 52-53, 57. http://www.cnki.com.cn/Article/CJFDTOTAL-FENG200504020.htm Lei J Y, Liao M F, Yang S J, et al. New method of predicting surge lines of fan[J]. Compressor, Blower & Fan Technology, 2005, (4): 52-53, 57. http://www.cnki.com.cn/Article/CJFDTOTAL-FENG200504020.htm
[5]	陈天君. 谈轴流压缩机和离心压缩机的喘振试验[J]. 化学工业与工程技术, 2007, 28(SI): 120-122. http://www.cnki.com.cn/Article/CJFDTOTAL-HXGJ2007S1039.htm Chen T J. Discourse of the surge margin test for the axial-flow compressor and centrifugal compressor[J]. Journal of Chemical Industry & Engineering, 2007, 28(SI):120-122. http://www.cnki.com.cn/Article/CJFDTOTAL-HXGJ2007S1039.htm
[6]	高超, 王娜, 袁先士, 等. NF-6增压连续式高速风洞压缩机喘振边界的确定[J]. 实验流体力学, 2013, 27(5): 61-65. http://www.syltlx.com/CN/abstract/abstract10393.shtml Gao C, Wang N, Yuan X S, et al. Determination of the axial-flow compressor surge boundary in NF-6 pressurized continuously-operating high-speed wind tunnel[J]. Journal of Experiments in Fluid Mechanics, 2013, 27(5): 61-65. http://www.syltlx.com/CN/abstract/abstract10393.shtml
[7]	惠增红. NF-6风洞轴流压缩机喘振信号检测､分析与应用[D]. 西安: 西北工业大学, 2006. Hui Z H. Axial flow compressor surge signal detection, analysis and application in NF-6 transonic wind tunnel[D]. Xi'an: Xi'an Northwestern Polytechnical University, 2006.
[8]	周恩民, 程松, 许靖, 等. 0.6米连续式跨声速风洞AV90-3型轴流式压缩机喘振边界测试研究[J]. 实验流体力学, 2014, 28(5): 81-85. Zhou E M, Cheng S, Xu J, et al. Surge margin test and research of AV90-3 axial compressor in 0.6m continuous transonic wind tunnel[J]. Journal of Experiments in Fluid Mechanics, 2014, 28(5): 81-85.
[9]	刘凯, 周恩民, 张文, 等. 一种风机转速测速装置: 中国, ZL201420448051.6. 2014. 12. 31. Liu K, Zhou E M, Zhang W, et al. A fan rotational speed measuring device: China ZL201420448051.6. 2014. 12. 31
[10]	叶吉成, 李德祥, 王政, 等. ∅5m立式风洞动力系统[J]. 实验流体力学, 2006, 20(4): 83-86. http://www.syltlx.com/CN/abstract/abstract9504.shtml Ye J C, Li D X, Wang Z, et al. The power system for ∅5m vertical wind tunnel[J]. Journal of Experiments in Fluid Mechanics, 2006, 20(4): 83-86. http://www.syltlx.com/CN/abstract/abstract9504.shtml
[11]	宋刚, 秦月霞, 张凯, 等. 基于普通编码器的高精度测速方法[J]. 上海交通大学学报, 2002, 36(8): 1169-1172. http://www.cnki.com.cn/Article/CJFDTOTAL-SHJT200208026.htm Song G, Qin Y X, Zhang K, et al. Approach and realization to improve the measuring accuracy with low resolution encoder[J]. Journal of Shanghai Jiaotong University, 2002, 36(8): 1169-1172. http://www.cnki.com.cn/Article/CJFDTOTAL-SHJT200208026.htm
[12]	GJB5221-2004风洞控制系统设计及检定标准[S]. 北京: 中国人民解放军总装备部, 2004: 2-11. GJB5221-2004 Design and calibration criteria of control systems for wind tunnels[S]. Beijing: The General Armament Department of China PLA, 2004: 2-11.
[13]	周平, 董谊信, 何悦, 等. 2.4m风洞马赫数和稳定段总压控制策略研究[J]. 流体力学实验与测量, 2001, 15(1): 75-81. http://www.cnki.com.cn/Article/CJFDTOTAL-LTLC200101014.htm Zhou P, Dong Y X, He Y, et al. Research on the control strategies of 2.4m wind tunnel Mach number and stilling chamber total pressure control systems[J]. Experiments and Measurements in Fluid Mechanics, 2001, 15(1): 75-81. http://www.cnki.com.cn/Article/CJFDTOTAL-LTLC200101014.htm